UAB “Mirneca” engineering solutions save your time, resources, and project lead time with no compromises to quality
UAB “Mirneca” operates by the principle that every project is like your own. That results in project completion with optimal resources and on time.
Our Project experience includes over 22 000 meters of laid technological pipings, over 90 000 m3 of assembled manufacturing equipment and engineering constructions, supplying over 7 000 tons of technical equipment and metal products, and producing over 100 reservoirs and liquid transfer equipment.
OUR PRODUCTS
Our Projects
AB BEGA
Location:
Klaipėda
BELACON
Location:
Hrodna Region
KRONOSPAN
Location:
SMORGONIS
VYTAUTAS SLANKAUSKAS, CEO “The variety of equipment required together with the size and complexity of the construction forced us to look for not only a professional and experienced partner but also capable to deliver a project of such scale in a quite short time, so we chose UAB MIRNECA ”
LIUDMILA SYRNIKOVA, CEO “To Assemble 1200 tons of metal constructions, 1500 tons of technological equipment, and the most advanced wood sheet press in Europe was a great challenge and responsibility. UAB “Mirneca” team professionally managed the project and succeeded with their required tasks. This proved that our decision was correct.”
Completed Projects
Services Provided
Project Management and contractors selection
UAB “Mirneca” – multiple years of international experience and a professional team gives us capabilities to provide engineering systems and industrial equipment installing project management services. On behalf of the client, we select the best project execution solution, contractors, equipment installers, and suppliers. We can offer complex technological solutions for industrial companies by choosing non-standard equipment manufacturers and best contractors, equipment customization, logistics, and project lead.
Manufacturing equipment and technical piping installation
One of our primary competence is industrial companies’ equipment and technological piping and construction installation. We have installed over 90 000 tons of technical equipment for the wood and electricity industries and laid down over 22 000 meters of technical piping.
For your project, we can assemble a team of 12 engineers and work managers, 30 high-class welders, 50 assemblers, and 30 electricians (for cable and channeling).
Metal constructions assembly and lightweight foundations
UAB “Mirneca” represents a variety of metal construction producers in Lithuania, Turkey, and other countries that can manufacture metal constructions of various technological complexity and materials. We have produced and installed over 17 000 tons of various purpose metal constructions.
Boiler and thermal isolation manufacturing, supply and manufacturing
We provide boilers, thermal isolation, electrical grid installation, and other infrastructure systems integration. For your project, we can offer up to 12 engineers and field managers, 30 high-class welders, 50 assemblers, and 30 electricians. We have manufactured and assembled liquid fuel boilers (efficiency of 6.4 ton per hour, maximum pressure of 8 bars), technical chimnies (height of 25 meters) and 6,5 MW modular steam boiler (Viesmann).
Reservoirs and non-typical storage manufacturing and assembly
UAB “Mirneca” designs, manufactures, and assembles a high variety of different purpose non-typical size storages, intended for work in vacuum environment (steamers, volume radiators, pipe condensators, vacuum dryers), closed or open boilers, and baths for the food industry (mixers, heaters, freezers), different purpose equipment (liquid CaCh manufacturing, materials melting and yeast manufacturing, whey crystallization and pasteurized, fermented milk manufacturing, medium neutralization, and biomass freezing), CIP stations, formalin glue, chemical materials and technical water reservoirs with a volume between 50 and 380 cubic meters, diameter from 2,7 to 7 meters).
5 Steps for Project Completion
1 Initial information submission and analysis of needs
If you are interested in acquiring products from the manufacturers that we represent, send us an inquiry or call. UAB “Mirneca” product manager will contact you in a short time and come to present the products, and our services and answer all the questions.
2 Specialists visit to the object location
Product managers take all of your needs into account and select a team of engineers and technicians that will look at all of your available information about your project, drawings, and other technical documentation that is important while choosing the correct product, parameters, quantities, required additional equipment, and a team of required specialists.
3 Project plan preparation and work scope definition
Preparation of the project plan for the technology will begin only after fully clarifying the needs of the customer. Our specialists will prepare a full equipment assembly schedule and needed resource selection and calculation. The project plan depends on the scope, assembly terms, needed resources, and logistics. We always adhere to the remarks made by the client and its’ requirements. We also take note of all comments from the general contractor to make the work safe and easy to perform with minimal investment without compromising quality.
4 Submitting the offer and concluding the contract
When the client has approved work projects, equipment layout schemes and all other required documentation is present, the detailed calculation for the offer is done. They are based on equipment, supply time, logistics scheme, the desired scope of assembly, and fuctions given to the contractor. If required, we can use subcontractors with the specific field of work with proper qualifications and certification. The client is presented with estimated project costs that are considered as a part of the contract. The contract draft can be provided by the client or the standard our company can be used.
5 Equipment ordering and the start of assembly work
After signing the contract and the down payment is done, UAB “Mirneca” start the equipment and resources mobilization towards the designated project location. It is not rare that we are not only the assemblers but can also take care of non-typical equipment manufacturing, logistics, and assembly. Preparation complexity will depend on desired equipment specifics, object suitability for the assembly works, client requirements, and engineering solution complexity. If required, we can organize the unloading of the arrived equipment and materials.
Initial information submission and analysis of needs
If you are interested in acquiring products from the manufacturers that we represent, send us an inquiry or call. UAB “Mirneca” product manager will contact you in a short time and come to present the products, and our services and answer all the questions.
Specialists visit to the object location
Product managers take all of your needs into account and select a team of engineers and technicians that will look at all of your available information about your project, drawings, and other technical documentation that is important while choosing the correct product, parameters, quantities, required additional equipment, and a team of required specialists.
Project plan preparation and work scope definition
Preparation of the project plan for the technology will begin only after fully clarifying the needs of the customer. Our specialists will prepare a full equipment assembly schedule and needed resource selection and calculation. The project plan depends on the scope, assembly terms, needed resources, and logistics. We always adhere to the remarks made by the client and its’ requirements. We also take note of all comments from the general contractor to make the work safe and easy to perform with minimal investment without compromising quality.
Submitting the offer and concluding the contract
When the client has approved work projects, equipment layout schemes and all other required documentation is present, the detailed calculation for the offer is done. They are based on equipment, supply time, logistics scheme, the desired scope of assembly, and fuctions given to the contractor. If required, we can use subcontractors with the specific field of work with proper qualifications and certification. The client is presented with estimated project costs that are considered as a part of the contract. The contract draft can be provided by the client or the standard our company can be used.
Equipment ordering and the start of assembly work
After signing the contract and the down payment is done, UAB “Mirneca” start the equipment and resources mobilization towards the designated project location. It is not rare that we are not only the assemblers but can also take care of non-typical equipment manufacturing, logistics, and assembly. Preparation complexity will depend on desired equipment specifics, object suitability for the assembly works, client requirements, and engineering solution complexity. If required, we can organize the unloading of the arrived equipment and materials.
Why Mirneca?
International experience and various fields of activity.
Speed and the Team of Professionals.
Flexible mobilization and capabilities.
Impeccable reputation and innovative solutions.
Parallel processes and efficiency.
Contact Us
Sigita Urbonienė
CEO of UAB “Mirneca”
“My biggest motivation – continuously challenge myself, and business is the university where you learn something new every day and never stop improving.”
Sigita Urbonienė
CEO of UAB “Mirneca”
“My biggest motivation – continuously challenge myself, and business is the university where you learn something new every day and never stop improving.”
